Triphenylphosphine-m-sulfonate/carbon tetrabromide as an easily recoverable catalyst system for the efficient synthesis of xanthene and xanthenone derivatives under solvent-free conditions

A solid complex,readily prepared from commercially available sodium triphenylphosphine-m-sulfonate（TPPMS） and carbon tetrabromide,can be used as an easily recoverable and reusable catalyst system for one-pot condensation of 2-naphthol with aldehydes to construct 14-aryl（alkyl）-14H-dibenzo[a j]-xanthene derivatives and one-pot condensation of 2-naphthol with aldehydes and cyclic 1 3-dicarbonyl compounds to construct 12-aryl（alkyl）-8 9 10 12-tetrahydrobenzo[a]xanthen-11-one derivatives.     

Simultaneous determination of three dipeptides (JBP485, Gly–Sar and JBP923) in the cell lysates by liquid chromatography‐tandem mass spectrometry: application to identify the function of the PEPT1 transfected cell

A simple and rapid liquid chromatography–tandem mass spectrometry (LC‐MS/MS) method for the simultaneous determination of JBP485, Gly–Sar and JBP923 in the cell lysates using methanol as a deproteinization solvent was developed and validated. Detection was performed by turbo ionspray ionization in multiple reaction monitoring mode using the transitions of m/z 147.1 → m/z 90.1 for Gly–Sar, m/z 201.1 → m/z 86.1 for JBP485, m/z 219.1 → m/z 86.1 for JBP923 and m/z 152.0 → m/z 110.0 for paracetamol (internal standard). The analytes were separated on a Hypersil ODS C₁₈ HPLC column using isocratic elution mode with a mobile phase containing 0.1% formic acid in water–methanol (97:3, v/v) at a flow rate of 0.2 mL/min. The calibration curves were demonstrated to be linear over the concentration range of 5.00?5000 nm with coefficient of 0.9968 for Gly–Sar, 0.9975 for JBP485 and 0.9952 for JBP923. The intra‐ and inter‐day precisions were <10.2% for each quality contro; level, and the accuracy was within ±5.6% for each analyte. The matrix effect, the extraction recovery and stabilities of LC‐MS/MS analysis were also investigated. This validated method was successfully applied to the simultaneous determination of JBP485, Gly–Sar and JBP923 in the cell lysates for identification of stably transfected HeLa cells with human PEPT1. Copyright © 2014 John Wiley & Sons, Ltd.     

Phosphido‐diphosphine pincer aluminum complexes as catalysts for ring opening polymerization of cyclic esters

New aluminum alkyl complexes, supported by o‐phenylene‐derived phosphido diphosphine pro‐ligands [Ph‐PPP]‐H and [ⁱPr‐PPP]‐H ([Ph‐PPP]‐H = bis(2‐diphenylphosphinophenyl)phosphine; [ⁱPr‐PPP]‐H = bis(2‐diisopropylphosphinophenyl)phosphine) are reported. Compounds [Ph‐PPP]AlMe₂ ( 1 ), [ⁱPr‐PPP]AlMe₂ ( 2 ), and [Ph‐PPP]AlⁱBu₂ ( 3 ) have been synthesized by reaction of the pro‐ligand with the appropriate trialkyl aluminum precursor and have been characterized by ¹H, ¹³C and ³¹P NMR spectroscopy. The solution NMR data and theoretical calculations suggest for all complexes trigonal bipyramidal structures with C_2v symmetry in which the phosphido diphosphine ligand acts as a κ³ coordinated ligand. All complexes promote the ring‐opening polymerization of ε‐caprolactone, L‐ and rac‐lactide. Polyesters with controlled molecular parameters (M_n, end groups) and low polydispersities are obtained. Upon addition of isopropanol, efficient binary catalytic systems for the immortal ring‐opening polymerization of the cyclic esters are produced. Preliminary investigations show the ability of these complexes to promote copolymerization of l ‐lactide and ?‐caprolactone to achieve copolymers whose microstructures are depending on the structure of the catalyst. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 49–60     

Tailoring Morphology of PVDF-HFP Membrane via One-step Reactive Vapor Induced Phase Separation for Efficient Oil-Water Separation

Poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP) receives increasing attention in membrane separation field based on its advantages such as high mechanical strength, thermal and chemical stability. However, controlling the microporous structure is still challenging.In this work, we attempted to tailor the morphology of PVDF-HFP membrane via a one-step reactive vapor induced phase separation method.Namely, PVDF-HFP was dissolved in a volatile solvent and then was cast in an ammonia water vapor atmosphere. After complete evaporation of solvent, membranes with adjustable porous structure were prepared, and the microstructures of the membranes were analyzed by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and X-ray diffraction characterizations. Based on the results, a mechanism of dehydrofluorination induced cross-linking of PVDF-HFP has been suggested to understand the morphology tailoring.To our knowledge, this is the first report of one-step reactive vapor induced phase separation strategy to tailor morphology of PVDF-HFP membrane. In addition, the membranes prepared in the ammonia water vapor exhibited enhanced mechanical strength and achieved satisfactory separation efficiency for water-in-oil emulsions, suggesting promising potential.     

Enhanced visible-light photoelectrochemical and photoelectrocatalytic activity of nano-TiO2/polyimide/Ni foam photoanode

Research on Chemical Intermediates - We report a novel method for fabrication of a nano-TiO2/polyimide (PI)/Ni foam photoanode. Characterization results indicated that porous nanostructured TiO2...     

Microstructural evolution of AZ31 magnesium alloy subjected to sliding friction treatment

Microstructural evolution and grain refinement mechanism in AZ31 magnesium alloy subjected to sliding friction treatment were investigated by means of transmission electron microscopy. The process of grain refinement was found to involve the following stages: (I) coarse grains were divided into fine twin plates through mechanical twinning; then the twin plates were transformed to lamellae with the accumulation of residual dislocations at the twin boundaries; (II) the lamellae were separated into subgrains with increasing grain boundary misorientation and evolution of high angle boundaries into random boundaries by continuous dynamic recrystallisation (cDRX); (III) the formation of nanograins. The mechanisms for the final stage, the formation of nanograins, can be classified into three types: (i) cDRX; (ii) discontinuous dynamic recrystallisation (dDRX); (iii) a combined mechanism of prior shear-band and subsequent dDRX. Stored strain energy plays an important role in determining deformation mechanisms during plastic deformation.     

Healable dual organic–inorganic crosslinked sol–gel based polymers: Crosslinking density and tetrasulfide content effect

In this article, the first generation of healable sol–gel based polymers is reported. A dual organic–inorganic crosslinked network is developed containing non‐reversible crosslinks and reversible (tetrasulfide) groups. The designed polymer architecture allows thermally induced mesoscale flow leading to damage closure followed by interfacial strength restoration due to reformation of the reversible groups. While the reversible bonds are responsible for the flow and the interface restoration, the irreversible crosslinks control the required mechanical integrity during the healing process. The temperature dependent gap closure kinetics is strongly affected by the crosslinking density and tetrasulfide content. Raman spectroscopy is used to explain the gap closure kinetics in air and dry nitrogen. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1953–1961     

Doubly stereocontrolled asymmetric Michael addition of acetylacetone to nitroolefins promoted by an isosteviol-derived bifunctional thiourea

A novel class of chiral bifunctional thioureas bearing a chiral lipophilic beyerane scaffold and a tertiary amino group was designed and prepared. The thioureas were proven to be effective for catalyzing the doubly stereocontrolled asymmetric Michael addition between acetylacetone and nitroolefins. The corresponding adducts were obtained in high yields (up to 95%) and with good to excellent enantioselectivities (up to 97%). In addition, the reaction of tert-butyl acetoacetate and trans-β-nitrostyrene also proceeded smoothly with good enantioselectivity.